EN
BTR185 INSTALLATION AND USE MANUAL - REV009A
31
BTR185
4 - Installation
• Cut the hull along the cutting area previously marked
(fig. 4).
• Align the counter flange to the hull’s opening and check that the two heights (X) are correct. Resinate the counter flange, or
solder it in case of aluminium or steel, according to the techniques the most suitable to the hull’s material (fig. 5).
Fig. 4
LID
HULL
Fig. 6
COUNTER FLANGE
• Make a solid coaming for the closing lid on the whole perimeter of the hull’s opening (fig. 6).
Fig. 5
Laminating system
recommended by Quick
®
.
F
HULL
COUNTER FLANGE
STRUCTURAL ADHESIVE
GRP LAYERS
GRP LAYERS
GRP LAYERS
GRP LAYERS
