24
BL2
EN
INSTALLATION AND USE MANUAL QUICK
BL2
- REV003B
8 - Spare parts
7.2 Problem-solving
8.0 Spare parts
(1) If the windlass stops and the hydraulic magnetic switch (or thermal cutout) has not tripped, wait a few seconds and
try again (avoid keeping the button pressed).
If the hydraulic magnetic switch, has tripped, reset it and wait a few minutes before weighing anchor once again.
If, after a number of attempts, the windlass is still blocked, we suggest to move the boat to release the anchor.
see engineering drawings on page. 13
WEIGHING THE ANCHOR
1.
Turn on the engine.
2.
Make sure the clutch is engaged and remove the handle.
3.
Press the UP button on the control provided.(1)
Check the upward movement of the chain for the last few meters in order to avoid damages to the bow.
CASTING THE ANCHOR
The anchor can be cast by using the electrical control or manually.
A. MANUALLY
The clutch must be disengaged allowing the gypsy to revolve and letting the chain or chain fall into the water.
To slow down the chain, the handle must be turned COUNTER - CLOCKWISE.
B. ELECRITCAL
To cast the anchor by using the electrical power, press the DOWN button on the control provided. In this manner, anchor
casting is under control and the chain unwind evenly.
In order to avoid any stress on the windlass-once the boat is anchored-fasten the chain or secure it in place
with a chain.
F
F
CODE
DESCRIPTION
NUM. PARTS
FVSSABL2YC0SA00
OSP KIT SHAFT 600W
3-6-7-8A-9A-10-11-12-13
FVSSABL2YC0LA00
OSP KIT SHAFT 900W/1200W
3-6-7-8B-9B-10-11-12-13
FVSSBBL20050A00
OSP GYPSY ROPE BL2 5/16”
15
FVSSBBL20060A00
OSP GYPSY ROPE BL2 6MM
15
FVSSBBL20070A00
OSP GYPSY ROPE BL2 7MM-1/4”
15
FVSSBBL20080A00
OSP GYPSY ROPE 8MM BL2
15
FVSSSTBLD000A00
OSP MOUNTING BRACKET BL2 1
FVSSCPBBGFFYA00
OSP GIPSY COVER FF 105Ø
15 - 16 - 27
FVSSTBL2F6Y5A00
OSP TOP BL2 F 600W 5/16
FROM 2 TO 27 (8A - 9A)
FVSSTBL2F6Y6A00
OSP TOP BL2 F 600W 6MM
FROM 2 TO 27 (8A - 9A)
FVSSTBL2F6Y7A00
OSP TOP BL2 F 600W 1/4”
FROM 2 TO 27 (8A - 9A)
FVSSTBL2F6Y8A00
OSP TOP BL2 F 600W 8MM
FROM 2 TO 27 (8A - 9A)
FVSSTBL2F9Y5A00
OSP TOP BL2 F 9/1200W 5/16”
FROM 2 TO 27 (8B - 9B)
FVSSTBL2F9Y8A00
OSP TOP BL2 F 9/1200W 6MM
FROM 2 TO 27 (8B - 9B)
FVSSTBL2F9Y7A00
OSP TOP BL2 F 9/1200W 1/4”
FROM 2 TO 27 (8B - 9B)
FVSSTBL2F9Y8A00
OSP TOP BL2 F 9/1200W 8MM
FROM 2 TO 27 (8B - 9B)
CODE
DESCRIPTIONS
NUM. PARTS
FVSSMR05TG40A00
OSP GEARBOX 500W WINDLASS TG40
29A
FVSSMR10TG50A00
OSP GEARBOX 1000W WINDLASS TG50
29B
FVSSR0612Q00A00
OSP MOTORGEARBOX 600W 12V
30A
FVSSR0624Q00A00
OSP MOTORGEARBOX 600W 24V
30B
FVSSR0912Q00A00
OSP MOTORGEARBOX 900W 12V
30C
FVSSR0924Q00A00
OSP MOTORGEARBOX 900W 24V
30D
FVSSR1212Q00A00
OSP MOTORGEARBOX 1200W 12V
30E
FVSSM1224000A00
OSP MOTORGEARBOX 1200W 24V
30F
FVSSM0612000A00
OSP MOTOR 600W 12V
31A
FVSSM0624000A00
OSP MOTOR 600W 24V
31B
FVSSM0912000A00
OSP MOTOR 900W 12V
31C
FVSSM0924000A00
OSP MOTOR 900W 24V
31D
FVSSM1212000A00
OSP MOTOR 1200W 12V
31E
FVSSM1224000A00
OSP MOTOR 1200W 24V
31F
7 - Usage & Warning
