accord with the PCB’s size. Fix the PCB between them and screw the lock knobs. And then screw the fixture
lock knob.
4.
Before doing the precise alignment, please screw the
Fixture Lock Knob
. By “PCB MOVE CONTROL” to
control the alignment from X, Y and
θ
.
5.
Press the key on the top of the rocker “PCB MOVE CONTROL” and when swinging the rocker leftward or
rightward, the PCB fixture will do the corresponding movement, leftward or rightward. When swinging the
rocker onward or backward, the PCB fixture will do the corresponding movement, onward or backward. If do
not press the key on the top of the rocker and swing the rocker, the pad sucking the chip can do turn 360
°
.
6.
Fix anomalistic PCB with anomalistic knightheads and bottom fixtures for preventing subside.
Anomalistic
knightheads
Bottom fixtures for
preventing subside
6
．
keys instructions
*
Keys on the left side
Page 6
The six keys can control the parameters setting of the “MAIN” interface.
SET
: click it into the setting mode.
SAVE
: click it to save the changed parameters and exit to set.
CAL
: calibrate the temperature about KT1~KT5, KTB, KTC and KIR.
: Controlling the cursor moving from one parameter to the
other parameter and then click “SET” key to the
parameter setting mode. Press
△
or
▽
key to change
the parameter and click “SAVE” key to exit the setting.
Power switch: turn on or turn off the power supply.
Emergency switch: when happening suddenness, pressing this switch and
cutting off the power supply
Summary of Contents for BGA2100
Page 1: ...QUICK BGA 2100 ...
