1.
Click “alignment” tab, it will display the alignment interface and the alignment arm will move out.
2.
For getting a clear image, it can adjust the light and focus the image by clicking the button at the right side or
by the keys or rocker on the unit.
The aligning function buttons
for getting a clearer image.
e)
Parameter adjustment Tab
1.
Click “Parameter adjustment” tab, it will display the Parameter adjustment interface.
2.
At this interface, it can change the parameter values in the all flows and save them.
3.
First, click “process select…” and then pop up a interface saving flow. Select a flow, such as “U1.medl” and
then change this flow’s parameter values.
4.
After change the values, click the “parameter’s save” to save the parameter values and click the “save curve”
to save the flow’s curve into the PC. And the values cannot be loss after turn off the power supply.
5.
The saved parameter values will be transmitted to the
Main interface
and the small LCD on the left side of
the unit.
Page 10
Summary of Contents for BGA2100
Page 1: ...QUICK BGA 2100 ...
