Adjust the front cover of motor rotors 1mm separation distance to heel cap cover , then tighten up
rotor screw with 3mm hexagonal socket and one screw of the rotor should be upper of the shaft
plan.
(2)
安装电机定子
Install the Motor’s Stator
将电机定子的电线朝下装到机器后端面上，并用
3mm
内六角扳手拧紧
4
颗固定螺钉。
Put the power cable of motor stator down onto the back side of machine and tighten up 4
screws with 3mm hexagonal socket.
(3)
安装控制箱
Install the controller box
将电机上的电机动力线和电机霍尔线插到电控箱插头上，并将电控装到机器后端面上。
Put motor power cable and motor hall cable into controller’plug, then install the control box onto
the back side of the machine.
(4)
安装手轮
Install the Pulley
将手轮旋转方向的第一颗螺钉对准上轴平面，用
2.5
mm
拧紧手轮的两颗螺钉，并确认手
轮前端未与罩壳碰擦。
The first screw of pulley rotation should be upper of the shaft plan , then tightenup 2 screws with
2.5mm hexagonal socket and confirm that the pulley front end doesn’t rub with the cover.
(5)
接插电线
Plug the Swich
Summary of Contents for 8801
Page 8: ......
