Quick Salt e-360, User Manual

Page: 43 / 56

43
MANUAL DE USUARIO
1) For safety reasons, it is very important to check if the earthing is in good condition. If you do not
have one, you will have to install a specific grounding rod for the electrical panel, to which you
can connect the grounding cables of the QUICKSALT chlorinator, filtration pump and any other
element with an earth connection located in your pool installation.
2) Check that the switchboard has the appropriate protection elements for its installation: Thermal
circuit breaker, differential switch and motor protection for the filtration pump.
3) Connect the power cable of your QUICKSALT equipment to the panel, respecting the phase,
neutral and ground connections. Do not leave the cable on the floor of the installation, but ensure
that it is well protected and anchored to the wall. If the distance is insufficient and you need to
extend it, do not use a roll-up extender. Consult your electrician or service technician if in doubt.
Your
QUICKSALT
saline chlorinator is already installed. Please read carefully the following
sections detailing how to perform the start-up.