Input 2
Similarly, from the menu on left side of the webpage, clicking “Input 2”, it
displays the information of the programs (3
rd
& 4
th
ones) from the 2
ed
HDMI
encoding
module.
IP Output
Click “IP Output”, it will display the interface where to configure the output IP stream
in MPTS or SPTS the as Figure-4.
Figure-4
After setting the parameters, click “Apply” to save the setting.
General
Clicking “General” from the menu, it will display the interface as Figure-5 where to
set the network info for the output TS.
This device supports 1 MPTS
& 4 SPTS IP output. Click the
related box to enable the
corresponding program to
output through IP Channel.
MPTS
4 SPTS for the 4 programs respectively
To configure the output IP
address and ports for the IP
Channels respectively.
HDMI MEPG-2 H.264 Encoder
User Manual
B-HDMI-ASI-IP-4CH
www.questtel.com
