background image

 

 

 

User Instructions 

Rack-Mount HD Video Encoder 

Model Name: 

DME-05

 

 

 

 

 
 
 
 
 
 

DOC-USR-0151-01 

Manual Version 1.0 

March 15, 2018 

 

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 

 

Copyright © 2018 Z3 Technology, LLC. All rights reserved.  

Z3 Technology and ZEUS are registered trademarks of Z3 Technology, LLC. 

This document contains proprietary information of Z3 Technology, LLC ("Z3").  This document may not be used, reproduced, disclosed, or 

disseminated to anyone without the prior written approval of an authorized representative of Z3. Z3 reserves the right to change this product at 

any time and without notice. All product names, trademarks, trade names, service marks, or service names mentioned in this document are the 

property of their respective owners.

 

 

 

Z3 Technology, LLC incorporates HDMI® technology.

 

The terms of HDMI and HDMI High-Definition Multimedia Interface, and 

the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

The Power of ZEUS™ 

Summary of Contents for DME-05













































































Reviews: