Battery Slot
PUSH HERE
PULL IT OUT
6
Battery Slot
Lithium coin battery
1. Open the CompactFlash cover.
2. Push the center of the battery
slot as shown.
3. Pull out the battery slot.
I n s e r t i n g a n d R e m o v i n g t h e B a t t e r i e s
This camera uses a two-way power supply, alkaline batteries and a USB cable that
connects to your computer. Refer to the following information for inserting the
batteries:
Alkaline Batteries:
Lithium Coin Battery:
Note
: 1. Be sure to always install the AA alkaline batteries first and then the
lithium coin battery when installing both at the same time.
2. Insert the lithium coin battery as indicated on the inside of the
CompactFlash cover.
3.The iQuest Roam camera requires alkaline batteries to operate. The
lithium coin battery is used as a backup power supply for saving images
on the internal memory if the alkaline batteries are removed or lose power.
Refer to the following information for removing the coin battery:
Lithium Battery:
