background image

29

One Year Limited Warranty

SIPIX, INC. WARRANTS THIS HARDWARE PRODUCT AGAINST DEFECTS IN
MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM THE 
ORIGINAL DATE OF PURCHASE AS IDENTIFIED ON THE PROOF OF PURCHASE
(YOUR RECEIPT). IT IS THE END-USERS RESPONSIBILITY TO MAKE CERTAIN
THIS PRODUCT IS IN WORKING CONDITION WITH THE INTENDED COMPUTER 
SYSTEM WITHIN THE ONE-YEAR WARRANTY PERIOD.

THESE ARE THE SOLE REMEDIES AND SIPIX’S SOLE LIABILITIES FOR 
PERFORMANCE OR FAILURE TO PERFORM OF THE PRODUCT. SIPIX RESERVES
THE RIGHT TO CHANGE ITS WARRANTY POLICY AT ANY TIME 
FOR ALL PRODUCTS DISTRIBUTED AFTER THE DATE OF SUCH CHANGE IN
WARRANTY. EXCEPT AS SET FORTH ABOVE, ALL OTHER WARRANTIES,
WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE ARE HEREBY EXCLUDED.

SIPIX SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR RELATED TO THE USE OR PERFORMANCE OF
THE PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA OR USE OF
DATA PROCESSING FACILITIES OR EQUIPMENT, REGARDLESS OF WHETHER
SIPIX MAY HAVE BEEN ADVISED ABOUT THE POSSIBILITY OF SUCH DAMAGES.
SIPIX’S MAXIMUM LIABILITY FOR ANY AND ALL DAMAGES ARISING OUT OF
USE OF THE PRODUCT SHALL BE LIMITED TO THE AMOUNTS PAID BY 
PURCHASER FOR SUCH PRODUCT.

This warranty is only valid within the boundaries and territories of the USA and
Canada. SiPix is not responsible for costs incurred due to shipping, insurance, 
customs, or duties. SiPix is not responsible for non-traceable packages or 
packages shipped without a valid RMA number on the outside of the package.

This warranty does not apply if the product has been damaged by an accident,
electrical fault, through misuse or abuse. If the product has been altered without
written authorization from SiPix, the warranty will be void.

This warranty applies only to hardware products manufactured by or for SiPix.
Warranted products must bear the “SiPix” brand name, trade name, or logo. The
aforementioned warranty and remedies are exclusive, and in lieu of all others,
whether oral, written, expressed or implied. SiPix specifically disclaims any and 
all implied warranties of merchantability and fitness for a particular purpose.

Warranty Information

Summary of Contents for SiPix
































Reviews: