background image

Page: 2

Falcon Drive Away

 (air) instructions

These instructions are for your Falcon air drive away awning. You should read these thoroughly before 
you use the awning. Always keep these instructions as you may need to refer to them at a later date.

!

Before first use:

 Check your awning before its first use.

•  Thank you for the purchase of this Quest Falcon porch awning.
•  This awning has been tested for defects and flaws at the production facility, 

but we recommend checking your awning by erecting it on your vehicle 
before you go away in case there is an issue with it.

•  Ensure your awning channel is free from debris and any rough edges as this 

can damage the awning when being erected.

Parts List

Description

Quantity

Awning canvas

1

Steel Pegs

32

Storm roof air beams

3

Quest Falcon Air Technology hand pump

1

Safety Advice:

 Fire, cooking and essential safety advice

•  Check any camp site fire and safety regulations and fully digest this important information. All members of your group should be aware of these precautions 

and know how to respond in the event of an emergency.

•  Your awning entrances should be kept clear at 

ALL

 times in case of the event of an emergency and exit is required. Flame and heat sources should be kept well 

away from your awning or flammable furniture.

•  NEVER

 use a fuel-burning appliance inside or close to your awning, including stoves, barbecues, lanterns or candles. Apart from the danger of fire, burning 

fuels such as gas or petrol without sufficient ventilation produces carbon monoxide, a colourless, odourless but deadly gas. A charcoal barbecue produces 
carbon monoxide even when it is working well and continues to do so until it is completely cold.

•  When your fuel-burning appliance is finished, fully extinguish the coals and move it away from your awning. Even a cool appliance can give off lethal 

amounts of  carbon monoxide.

Summary of Contents for Falcon Air















Reviews: