Page: 3
Screen House
and accessories instructions
All Models
When erecting the screen house , always ensure the roof joint (the large black steel joint) is on the
floor and never in the air as this can lead to turning the screen house inside out.
• The screen house frame is made to be easily erected, but take care when erecting and taking down
the screen house. Always ensure that nothing is twisted or caught in the frame.
• NEVER
force the frame, it will open or close without the need for undue force. Applying undue force
could damage the frame and would invalidate your warranty.
• Although extremely easy we recommend that you put this screen house up and down a few times
at home or in an area such as a basement or garage before putting it up outside. This allows you to
get used to the process before putting it up in an area that could be exposed to wind and rain.
• The screen house can be put up by one person, but it is easier to erect with two people.
• We recommend that you always peg the screen house down with both the screen house pegging
points and the included storm straps.
• Always use the included the storm straps, but
DO NOT
over tighten them. The strap should be tight
enough to hold the sidewall in place, it should not pull the sidewall towards the ground. Otherwise
this could lead to the roof folding in during use.
Screen House Pro Models Only
• The screen house pro models feature sewn and zipped in external walls. These simply zip shut and
can be unzipped and rolled up to expose the mesh sides of your screen house.
• Accessory zip(s). The Screen House Pro models also feature an accessory zip located around the
door(s). These allow the addition of optional extra.
• The Screen House 6 Pro also has two doors, one at the front and one at the rear. The front door can
be identified by the logo printed above it and the rear door can be identified as it does not have a
logo above it.
Read Before Use
Extra information to ensure the safe and successful use of your screen house