September 2020
5
Quest IQ Compressor Wall OMM
HVAC system Options
•
Indoor or outdoor installation.
o
Note:
Pic. C.1. shows outdoor model.
•
Capacity (number of 2-stage compressor pods or modules)
–
(see
HVAC system Optional Arrangement
below
for more details):
o
2-compressor modules AG-012 & AG-016
o
3-compressor modules AG-020
o
4-compressor modules AG-024 & AG-030
o
6-compressor modules AG-036 & AG-045
o
9-compressor modules AG-055
•
Airflow/ductwork connection *. Pic. C.1 shows some options only; each option location availability depends on
the HVAC system installation (indoor or outdoor) and other options:
o
Return Air
(
RA
) ductwork connection - top, bottom, end, sides.
o
Supply Air
(
SA
) ductwork connection
–
top, bottom, sides.
•
Optional
Space Heating
- hot water coil, electric or gas heater **.
•
Optional
Economizer Coil
–
for additional cooling.
•
Air Conditioning
(
AC
)*
–
external water cooling or dry cooler (packaged or separate).
o
Note:
Pic. C.1 shows outdoor model
with “packaged”
dry cooler (mounted with the HVAC system).
“Packaged’ AC option is available for outdoor models only; alternatively, indoor and outdoor models
could be fitted for separate/remote AC option
–
remote dry cooler or other external cooling media
source.
*
Some available options (tonnage, ductwork connections, AC options etc.) are shown. Refer to the submittal
and other relevant documentation for your HVAC system
’s option
s.
**
For specific details on space heating (hot water, gas, electric) option, refer to the submittal and other
documentation:
•
Gas-fired duct heater
can be installed internally (fitted inside the HVAC system at the factory).
•
Electric heater
or
hot water coil
, depending on capacity, model, size, etc., mounted internally. Refer to your
system’s
submittal documentation.
Attention! Equipment Clearances and Dimensions!
CAUTION!
For equipment proper operation, maintenance and service, respective clearances should be
maintained. Generally, 30” clearances to the equipment must be kept for the maintenance and service purposes.
For the specific required clearances information, as well as HVAC system overall dimensions, distances to pipe
connections, duct connections etc., refer to the submittal documentation.
