DR4300 Owners Manual
Initializing the TPM for BitLocker users
137
NOTE:
To locate the TPM connector on the system board, see the System board connectors section.
2. Align the edge connectors on the TPM with the slot on the TPM connector.
3. Insert the TPM into the TPM connector such that the plastic rivet aligns with the slot on the system board.
4. Press the plastic rivet until the rivet snaps into place.
Figure 63. Installing the TPM
a. rivet slot on the system board
b. plastic rivet
c. TPM
d. TPM connector
1. Install the system board.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
See also:
Before working inside your system
See also:
See also:
After working inside your system
Related references
See also:
See also:
System board jumpers and connectors
Initializing the TPM for BitLocker users
1. Initialize the TPM.
For more information about initializing the TPM, see
http://technet.microsoft.com/en-us/library/
The
TPM Status
changes to
Enabled, Activated
.
Summary of Contents for DR4300e
Page 1: ...DR4300e System Owner s Manual ...
Page 181: ...DR4300 Owners Manual 181 Index ...
