background image

STATUS INDICATORS

Breathing Green 

 

Your Controller is connected to the internet. When it is in this mode, you can call functions via the App.

Blinking Green

 

The Controller is trying to connect to the internet. If it continues to blink for several seconds, make sure that 

your internet service is working, then try resetting your Controller.

Blinking Blue

 

The Controller is in Listening Mode; it is waiting for your input to connect to Wi-Fi. This is the mode it comes 

in from the factory.
After the initial setup, if you want to change the Controller’s Wi-Fi settings, press and hold the Setup button 

for approximately 15 seconds until the light flashes blue rapidly. Release the Setup button and the light will 

start blinking blue. The Controller is back in Listening Mode. From the App, go to Settings > Connect to 

Controller to reconfigure your Controller.

CUSTOMER SUPPORT

Superior Customer Service 

 

Quest office hours are Monday - Friday, 8 am - 5 pm CT. Don’t hesitate to reach out. Contact us at  

[email protected] or 1-877-420-1330. For technical questions regarding Cloud Control, contact 

Growlink at 1-800-432-0160 or growlink.com.

Summary of Contents for Cloud Control Base













Reviews: