Quest Engineering Cloud Control Base, Manual

Page: 9 / 12

SET UP THE CLOUD CONTROL
Step 1: Mounting the Cloud Control
Mount the controller to any wall near the wireless access point and plug it in with the included 12V Power Adapter.
Step 2: Mounting the Sensor Module
Locate the Premium Sensor(s) in a clean and dry location where it will
sample non-stagnant air. If you are utilizing the light sensor for sun sensing,
ensure the light sensor has a clear path to the sun or light source. The
Premium Sensor is designed to be suspended with the light sensor facing up
and hanging at canopy level. The Premium Sensor can also be mounted to a
wall with the wall-mounting hardware (order kit PN 4041954). Locate the
sensor no more than 500 feet from the controller. See options 1 and 2 for
hanging the sensor. Run power to the Premium Sensor with the included
power extension cord and adapter.
Option 1 - Eye Hook: Screw the eye hook into the top of the sensor.
Attach to wall.
Option 2 - Bracket: Attach bracket to sensor using two small screws. Use two
long screws to mount bracket to wall. If attaching to drywall, use anchors.
Step 3: Download the App and Create an Account
Download the Cloud Control app and create an account within the app (see previous page for App
download information). Register your Cloud Control account to manage one or more Controllers.
1. Launch the Cloud Control App.
2. Type your Name, Email address, and Password in the corresponding fields.
3. Tap Continue when you’re finished.
Step 4: Follow the Onscreen Instructions
Once you have created an account, on-screen prompts will guide you through the setup process.
Step 5: Add Power Links
Once your Environment Controller is set up, you can add your Power Links to it.
Option 1 - Eye Hook Option 2 - Bracket
Premium Sensor Mounting Hardware Kit:
(PN 4041954)
(2) Long Screws
(2) Anchors
(1) Bracket
(1) Eye Hook
(2) Small Screws