11
5. Installation
• For concealed cable applications where the cable is running through
the wall space or roof space, and the cable will enter from the rear
of the alarm base:
1. It may be necessary to remove the outer sheath prior to securing
the base to the ceiling. (Excess cable may restrict the terminal cover
from securing shut)
2. Terminate the cables in the terminals provided to meet with relevant
local code requirements. Insert the cables into the terminals
clamping the terminal to the copper by tightening the screw on
each terminal.
3. Secure the alarm base to the surface with the fixings provided. (refer
to Figures 4A and 4B).
4. Prior to closing the terminal cover ensure that there are no wires
obstructing its path.
5. Close terminal cover. You will hear a ‘click’ as it is secured.
6. If alarm is not being interconnected by hardwiring to other alarms
devices, the interconnect cable terminal (I/C) on alarm mounting
base remains unused.
Figure 4C
Figure 4A
Figure 4B
Terminal cover
