5
Select the symbol you have chosen by pressing the selection (SEL) button several times, then confi rm your
choice by holding down the selection (SEL) button.
You will fi rst have to enter the longitude of the point you want to store.
You are taken to the following screen:
The symbol in the top left is a reminder of the destination point. The symbol on the right (vertical lines)
indicates that you have set the longitude. The fi gures indicate the longitude value in E (east) format:
degrees (00) ° Minutes (00)’ seconds (00,00). The maximum value is 180 ° 00 ’00. 00 ”
Setting the value:
The fi gure to be set is highlighted by an arrow. Press the Selection (SEL) button several times to set the right
value. Confi rm this value by holding down the selection button (SEL). The cursor moves to the next fi gure.
You then need to set the latitude of the point you want to store. You are taken to the following screen:
The symbol in the top left is a reminder of the destination point. The symbol on the right (horizontal lines)
indicates that you have set the latitude. The fi gures indicate the latitude value in N (north) format: degrees
(00) ° Minutes (00)’ seconds (00,00). The maximum value is 90 ° 00 ’00. 00 ”
Setting the value:
The fi gure to be set is highlighted by an arrow. Press the Selection (SEL) button several times to set the right
value. Confi rm this value by holding down the selection button (SEL). The cursor moves to the next fi gure.
When the last fi gure has been confi rmed, the display returns to the settings menu.
4.3.2. System settings
In this menu can go to the various system settings:
Select the symbol you have chosen by pressing the selection (SEL) button several times, then confi rm your
choice by holding down the selection (SEL) button.
Setting the time
zone
Setting units
of distance
(kilometres, miles
and nautical miles)
Setting the
backlighting
time
Setting the time
before the device
goes to standby
4.3.2.1 Setting the time zone
In this screen you can set the time diff erence of the place where you are with reference to the Greenwich
Meridian. The time information is part of the GPS signal, so you don’t need to set it. To set the time zone,
scroll through the fi gures from -12 to +12 by pressing the selection (SEL) button repeatedly. For example,
central Europe is +1 (+2 in Summer Time).
Hold down the selection (SEL) button to confi rm your choice and then hold it down again to exit this
setting and return to the System settings menu.
4.3.2.2 Setting the units of distance
In this screen you can set the system of units of distance. Choose from kilometres (km), miles (mile) and
nautical miles (nm). Keep pressing the selection (SEL) button until the cursor is next to the required unit.
Hold down the selection (SEL) button to confi rm your choice and then hold it down again to exit this
setting and return to the System settings menu.
