QUBINO ZMNHHD1, User Manual

Page: 48 / 58

EN .
48
NOTE: Parameter is valid only in Dimmer mode. In Switch mode the parameter has no effect.
Parameter no. 70 - Overload safety switch
The function allows for turning off the controlled device in case of exceeding the defined power
for more than 5s. Controlled device can be turned back on by input I1 or sending a control
frame.
Values (size is 2 byte dec):
• default value 200
• 1 – 200 = 1 W – 200W
• 0 = function not active
ⓘ
NOTE: This functionality is not an overload safety protection, please check the technical
specifications chapter for more details.
In case of overload the following message will be send towards the controller:
• COMMAND_CLASS_NOTIFICATION_V5
• The Alarm V1 type field set to 0x00
• Notification Type 0x08 and 0x08 (Overload detected)