QUBINO ZMNHHD1, User Manual

Page: 33 / 58

EN .
33
9. Electrical Diagram (110 - 240VAC, 24-30VDC)
3-Wired System 2-Wired System
Notes for diagram:
N Neutral wire (+VDC)
L Live (line) wire (-VDC)
Output for electrical device
I Input for switch/push button *
S Service button (used to add or remove the device from the Z-Wave network)
LED When the Mini Dimmer is excluded:
•
green LED is blinking (1 sec ON, 1 sec OFF)
•
red LED is ON if overload occurs
•
red LED is blinking (1sec ON, 1 sec OFF) if over temperature occurs
•
blue LED is blinking (1 sec ON, 1 sec OFF) when calibration is in progress
•
blue LED is ON if calibration fails
When the Mini Dimmer is included:
•
green LED is ON
•
red LED is ON if overload occurs
•
red LED is blinking (1sec ON, 1 sec OFF) if over temperature occurs
•
blue LED is blinking (1 sec ON, 1 sec OFF) when calibration is in progress
•
blue LED is ON if calibration fails