QUBINO ZMNHHD1, User Manual

Page: 38 / 58

EN .
38
12. Associations
Use associations for direct communication between the Mini Dimmer and other devices within
your Z-Wave network without the need of your primary gateway (hub).
Association Groups:
Root device:
ID Name Allowed
nodes Description
1 Lifeline 1 Supports the following command classes:
•
Device Reset Locally: triggered upon request
•
Meter Report: triggered according to Configuration
parameters 40 and 42
•
Notification Report: triggered on overload/over
temperature
•
Switch Multilevel Report: triggered upon request or
according to Configuration parameters 11 and 12
(note that this command class is active only in
dimmer mode)
•
Switch Binary Report: triggered upon request or
according to Configuration parameters 11 and 12
(note that this command class is active only in switch
mode)
2 Basic OnOff 16 Supports the following command classes:
•
Basic set: triggered at change of output and
reflecting its state
3 StartStop level
change 16 Supports the following command classes:
•
Start/Stop Level Change: triggered upon holding and
releasing the switch connected to I1
4 Multilevel set 16 Supports the following command classes:
•
Switch Multilevel Set: triggered at change of output
and reflecting its state
ⓘ
NOTE: Association 3 StartStop level change is switch type dependant. The switch must be a
bi-stable switch type otherwise the association can not be trigered. To know how to chnae the
switch type connected please refer to chapter Configuration parameters for more information.
ⓘ
NOTE: When the device is in switch mode (parameter 5 set to 1), association groups 3 and 4
have are not available. Please refer to chapter Configuration parameters for more information.