I
NSTALLATION
Harmony
Ball Return Manual
–
400-254-022
17
Rev. Date 3/16
6.7 INSTALLING THE BALL LIFT CONTROL BOX
1.
Install the correct fuses for the input voltage. Fuses
are supplied with the control box. Check the
appropriate box on the side label to indicate which
fuse this specific control box will use.
2.
Remove the cover and connect the cables to the
control box. Refer to
6.9 CONNECTING THE
WIRING
in this manual. Replace the cover.
3.
Install the control box as shown in Figure 14 using the supplied hardware.
4.
Route wires on the even-lane side of the ball lift and secure the cable ties as required to
keep the wires out of the path of the ball or any moving parts.
Figure 14, Control Box Installation
Figure 13, Control Box Fuse Label
