Qubic System QS-210, User Manual

Page: 24 / 50

QS-210
3.6. EXTENSION SET LAYOUT SETUP
Start the configuration by setting the CFG Switches to the appropriate positions in accordance
with one of the eight variants of the power cabinets and actuators installation to the
cockpit. Go to
QubicManager → Tools and Diagnostics → Devices and select Configure .
WARNING
■
The CFG Switch CAN NOT be set in the same position in both power cabinets.
■
When changing CFG Switch setting the main power must be SWITCHED OFF .
■
When changing the CFG Switch setting FIRMLY SET THE SWITCH into lower
or upper position. Do not leave the switch in the floating position (neither
up or down position), otherwise the device will not work.
User Manual R1 09/2023 24