![background image](http://html1.mh-extra.com/html/qube/ap1/ap1_supplemental-instructions_3551924006.webp)
© Qube Engineering 2009
Qube’s AP1 LED Dash DIY Kit Supplemental Instructions Page 6
5)
While holding the ribbon cables out of the
way, lift cluster computer off of the gauge
cluster housing. Set it aside.
6)
Twist each exposed bulb on the upper
portion of the gauge cluster housing 1/8
th
of
a turn counterclockwise to remove them.
You should remove the following bulbs….
-2 brown base bulbs with blue bulb covers
-2 red base bulbs
-3 light grey base bulbs
-3 dark grey base bulbs
Set the bulbs aside.
7)
Carefully remove the upper trace
filament from the gauge cluster housing.
You may want to use the small flat
screwdriver to help certain parts of the
filament off the housing. Set it aside.
8)
Twist the remaining bulbs on the lower
row of the gauge cluster housing 1/8
th
of a
turn counterclockwise to remove them. You
should remove the following bulbs…
-9 dark grey base bulbs
-1 black base bulb
Set the bulbs aside.