![background image](http://html1.mh-extra.com/html/qube/ap1/ap1_supplemental-instructions_3551924015.webp)
© Qube Engineering 2009
Qube’s AP1 LED Dash DIY Kit Supplemental Instructions Page 15
35)
Cut the lower trace filament along the
line shown. You will not use the small piece.
36)
Install the modified lower trace filament
onto the plastic gauge cluster housing.
37)
Install the 9 dark grey based bulbs and
one black based bulb as shown.
38)
Turn the gauge cluster assembly back
over. Reinstall the four black template
pieces onto the gauge cluster assembly.
BLACK
DARK GREY
EMPTY