Quattro Titanium, Installation Manual

Page: 5 / 140

EN 04
Package Contents (Fig.A)
REF QTY DESCRIPTION
1 1 Motor Unit (A)
2 1 Motor Unit (B)
3 1 Main Cross Bar
4 1 Cross Actuation Centre Bar
5 2 Cross Actuation Insert Bars
6 1 Engagement Tool
7 4 Classic Clamp - Stop Nut and Bolt*
8 2 Classic Clamp - Upper Plate*
9 2 Classic Clamp - U Plate*
10 2 Classic Clamp - Lower Plate*
11 1 Convoluted Cable Trunking
12 2 Positive (+) Red Motor Wire
13 2 Negative (-) Black Motor Wire
14 1 Positive (+) Red Battery Wire
15 1 Negative (-) Black Battery Wire
16 8 Classic Clamp - M10x55mm Bolt
17 8 Classic Clamp - M10 Nyloc Nut
18 8 Classic Clamp - Ø10mm Washer
19 20 M4x15mm P-Clip Screw
20 10 Cable P-Clips 19.2mm
21 10 Cable P-Clips 10.4mm
22 4 Battery Terminal Connector Ø8mm
23 4 Terminal Ring Connector Ø6mm
24 4 Terminal Ring Connector Ø4mm
25 3 Cable Number Markers (1,2,3,4)
26 3 Cable Polarity Markers (+,-)
27 4 Motor Unit Cable Ties 8x400
28 10 Cable Ties 2x70
29 1 Power Isolation Switch (inc. Key and Fixings)
30 2 20mm Roller Distance Spacers
31 2 Shark Clamp Mounting System*
*Depending on model, either Classic Clamp or Shark Clamp will be supplied.
i