Ref: EGO4446/EGO400-UM-Rev.B. UK 11
Caravan battery could be overloaded. Check electronics box (Blue LED is on and Red LED is flashing continuously). Check your
charging equipment and try to discharge the battery by connecting/using a light or other load. If this does not give any result,
renew caravan battery before taking any further action.
Check the cable-connection between the caravan battery and the control unit.
Badly connected or corroded battery terminals can cause intermittent problems, check battery terminals, clean and connect
again.
Check the distance between the remote control and the caravan is not more than 5 metres. If there is no signal between the
remote control and control box, the mover will not function at all, even though the LED on the remote control is on.
All error messages will reset automatically after 40 seconds. If this does not occur, reset the mover by switching off the mover
via the isolator switch for at least 10 seconds and turn it on again. Then re-establish the connection with the remote control (by
pressing the power button on the handset twice within 1 second).
Rollers slip on wheels:
Check that the disengaged distance of the rollers to the tyres is 20mm on both sides. Check for correct tyre pressure by referring
to your caravan manufacturer’s handbook. If the pressure is low, the roller would need to be pushed into the tyre further than
usual to gain sufficient traction.
In case of any doubt, please call your Caravan Mover supplier.
Summary of Contents for Enduro EM4446
Page 8: ...Fig 22...
