background image

Ref: EM4446/EGO400-UM-Rev.B.   UK 2 

Thank you for choosing this caravan mover. This product has been produced according to very high standards and has undergone 

careful quality control procedures. Simply by using the remote control you can move your caravan effortlessly into any position 

required within operating guidelines. 

Before proceeding with installation and starting to use the mover, please read this manual very carefully and be aware of 

all the safety instructions! The owner of the caravan will always be responsible for correct use. Keep this manual inside 

your caravan for future reference.

This User Manual covers two models of  Caravan Mover: Model No. EGO400 and Model No. EM4446; any installation or operational 

differences between the two models are detailed where appropriate. The caravan mover consists of two 12V motor-powered 

rollers, a 12V electronic control box and a remote control. To function, the motor-powered rollers must be engaged against the 

tyres of your caravan. The supplied cross actuation device enables you to engage both rollers at the same time from one side of 

your caravan. Once this is done the mover is ready for operation. The remote control will allow you to move your caravan in any 

direction. 

The chassis clamps provided are suitable for fitment onto most standard caravan chassis that have an L-shape or U-shape profile. 

Please refer to Fig.17 & Fig.18 for reference on dimensions and clearances BEFORE you proceed any further with installation. 

If your chassis has different dimensions to those shown in Fig.18 then various chassis clamp adapters are available to suit the 

majority of UK and Continental caravans; please refer to the section entitled ‘Optional Fitting Adapters’. 

Note: Adjustment of this manner is only available with the Classic Clamp option.

* Average Current Consumption readings when using an approx. 1100Kg single axle caravan on a hard, level surface.

** Maximum Current Consumption readings when using an approx. 1100Kg single axle caravan ascending a 1:4 (25%) gradient.

   

 

   

   

These symbols identify important safety precautions. 

 

 

 

They mean CAUTION! WARNING! SAFETY FIRST! IMPORTANT INFORMATION!

Specifications

Installation Safety Guidelines

Important Safety Instructions

Read this User Manual carefully before installation and use. Failure to comply with 

these rules could result in serious injury or damage to property.

Introduction

Fitting Guidelines

Model Number

EGO400

EM4446

Operational  Voltage

12 Volt DC

12 Volt DC

Average Current Consumption*

25 Ampere (approx)

25 Ampere (approx)

Maximum Current Consumption**

76 Ampere (approx)

76 Ampere (approx)

Speed

12cm per sec. (approx)

9cm per sec. (approx)

Approx. Net Weight (inc. all fixings & accessories)

35 Kg

40 Kg

Safe Working Load (SWL) Twin Motor/Quad Motor

2250Kg/3500Kg

2250Kg/3500Kg

Minimum Width (caravan/trailer)

1800mm

1800mm

Maximum Width (caravan/trailer)

2500mm

2500mm

Power Source (caravan leisure battery)

12V

12V

Summary of Contents for Enduro EM4446























Reviews: