![background image](http://html1.mh-extra.com/html/quatreau/smarttap/smarttap_user-manual_3545513009.webp)
9
FREQUENTLY ASKED QUESTIONS
My chilled and boiling
water flow seems to have
reduced
To reduce flow
turn anti clockwise. Once flow is correct
simply lock the PRV by pushing it back into place. You
will hear/feel a distinct click. Note that if your system is
attached to a RODI purifier, you should only make this
adjustment when the RODI tank is full (indicated by the
lights on the Memory Panel reading tank full at which
stage the system is not in production).
Both the boiling and chilled water flow is directly
influenced by the feed water into the Quatreau 553-B or
CS. Boiling flow can also be adjusted using the PRV.
Ensure that the water supply has not been turned off.
If using a RODI or PurityPRO system there is a finite amount
of water available during the normal usage. The RODI
system replenishes its storage tank at the rate of 5ltrs/hr.
If you may have used the capacity of the tank (10litres
when full) simply wait for the unit to recover and flow
should restore itself to normal.
If flow rate has significantly dropped after the RODI tank is
full and mains water pressure is not effecting the system
(minimum requirement is +2Bar), it may be necessary to
change the filter on the front of the Quatreau 553-B or
CS. Check what type of filter your system is fitted with and
organise a module change directly with the Pure H2O
Company Ltd on 01483 617000.