![background image](http://html1.mh-extra.com/html/quatreau/qst553/qst553_quick-start-manual_3540348004.webp)
4
5
1. Unscrew the CO2 canister that comes with
your Quatreau system.
3. Replace the barb fitting on the new pres-
sure regulator (A) with the male adapter fit-
ting you purchased.
4. Remove the 1/4” tubing from the connec-
tion on the water heater marked CO2 out
and connect it to the new pressure regulator
1/4” male adapter (C) you previously installed
on the regulator.
2. Connect the new regulator to the new CO2
tank (B).
A. Pressure regulator
B. CO2 bottle
C. Male adapter 3/8” NPT x 1/4” push fitting
MATERIALS NEEDED TO CONVERT
THE CO2 BOTTLE TO A LARGER
CO2 SUPPLY
CO2 BOTTLE CONVERT TO
LARGER CO2 SUPPLY PROCEDURE:
11. Check for leaks around the canister to en-
sure it is dry.
12. You may have to wait 10 minutes for the
water heater to come up to temperature be-
fore getting hot water.
5. You are now ready to adjust the CO2 to
get proper water to CO2 mixture.
6. You can now adjust the new CO2 Larger
bottle using the new CO2 regulator to get
proper carbonation in your drinking water.
CONVERT CO2 BOTTLE
CONVERT CO2 BOTTLE