Quatech Asynchronous Communications Adapter DSC-200/300 User Manual Download Page 5

Page: 5 / 39

8.5 Half-Duplex/Full-Duplex Selection

. . . . . . . . . . . . . . . . . . . . . . . . .

8.4 AUXIN/AUXOUT Loopback

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.3 XCLK

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.2 RCLK

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.1 RTS/cts Handshake

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8 External Connections

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 OS/2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1.1 QTPCI.EXE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 DOS and Other Operating Systems

. . . . . . . . . . . . . . . . . .

5.6 Windows NT

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.5 Using the "New Hardware Found" Wizard

. . . . . . . . . . . . . . . .

5.4 Windows 95

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3 Windows 98

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2 Windows 2000

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1 Windows Millennium

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Windows Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4.2 Clock Rate Multiplier

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4.1 Enhanced Serial Adapter Identification

. . . . . . . . . . . . . . . . .

4.4 Options Register

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.3 Interrupt Status Register

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2 Enabling the Special Registers

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1 Base Address and Interrupt Level (IRQ)

. . . . . . . . . . . . . . . . . . .

4 Address Map and Special Registers

. . . . . . . . . . . . . . . . .

3 Hardware Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4.2 Force High-Speed UART Clock (X2, X4, or X8,
J10-J12)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4.1 Enable Scratchpad Register (SPAD, J13)

. . . . . . . . . . . . . . . . .

2.4 Clock Rate and Optional Registers

. . . . . . . . . . . . . . . . . . . . . . . . . .

2.3 Full-duplex/Half-duplex Operation

. . . . . . . . . . . . . . . . . . . . . . . .

2.2 Signal Connections

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 RS-422 or RS-485 Signal Line Termination

. . . . . . . . . . . . . . . . . .

2 Hardware Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1.1 "IND" Option --- Surge Suppression Upgrade

. . . . . . . . . . .

1.1 Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 General Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of Contents for Asynchronous Communications Adapter DSC-200/300








































Search results

Summary of Contents for Asynchronous Communications Adapter DSC-200/300

Reviews:

Related manuals for Asynchronous Communications Adapter DSC-200/300

Brands by name

Popular brands

Quatech Asynchronous Communications Adapter DSC-200/300, User Manual

Search results

Summary of Contents for Asynchronous Communications Adapter DSC-200/300

Reviews:

Related manuals for Asynchronous Communications Adapter DSC-200/300

Brands by name

Popular brands