Quatech Asynchronous Communications Adapter DSC-200/300 User Manual Download

Page: 2 / 39

WARRANTY INFORMATION

Quatech, Inc. warrants the

DSC-200/300

to be free of defects for

five (5) years

from the date of purchase. Quatech, Inc. will repair or replace any board that fails to perform

under normal operating conditions and in accordance with the procedures outlined in this

document during the warranty period. Any damage that results from improper installation,

operation, or general misuse voids all warranty rights.

Please complete the following information and retain for your records. Have this

information available when requesting warranty service.

DATE OF PURCHASE:

MODEL NUMBER:

DSC-200/300

PRODUCT DESCRIPTION:

Two Channel RS-422/485 Asynchronous

PCI Bus Communications Adapter

SERIAL NUMBER:

Summary of Contents for Asynchronous Communications Adapter DSC-200/300








































Search results

Summary of Contents for Asynchronous Communications Adapter DSC-200/300

Reviews:

Related manuals for Asynchronous Communications Adapter DSC-200/300

Brands by name

Popular brands

Quatech Asynchronous Communications Adapter DSC-200/300, User Manual

Search results

Summary of Contents for Asynchronous Communications Adapter DSC-200/300

Reviews:

Related manuals for Asynchronous Communications Adapter DSC-200/300

Brands by name

Popular brands