Quatech Asynchronous Communications Adapter DSC-200/300 User Manual Download Page 38 | Manualshive

Page: 38 / 39

background image

11 Troubleshooting

Listed here are some common problems and frequent causes of those problems.

If the information here does not provide a solution, contact Quatech technical support.

Any unauthorized repairs or modifications will void the DSC-200/300's warranty.

Computer will not boot up.

1. Is the DSC-200/300 properly inserted? Remove the card and try again. Perhaps

try a different expansion slot.

2. Ensure that an ISA-bus card is not using the same IRQ that the PCI BIOS tries to

assign to the DSC-200/300. Most computers have BIOS setup options to reserve
IRQs for either ISA or PCI use. Try reserving the IRQ for the ISA card. The BIOS
will automatically choose a different IRQ for the DSC-200/300. An address
conflict is unlikely because most PCI-based computers will assign I/O
addresses in such a way that they cannot conflict with ISA-bus devices.

3. The DSC-200/300 may be defective. Contact technical support for instructions.

Cannot communicate with other equipment.

1. Are the cable connections correct? Are the cables securely attached?

2. Is the software configured with the correct base address and IRQ information for

the DSC-200/300? (This is mainly a DOS issue.)

3. Is the device driver installed?

4. If you are trying to communicate with another DTE, a null-modem cable will be

required.

5. If possible, use a loopback connector to test the port.

Quatech DSC-200/300 User's Manual

38

«
...
36
37
38
39
»

Summary of Contents for Asynchronous Communications Adapter DSC-200/300








































Reviews:

No comments

Related manuals for Asynchronous Communications Adapter DSC-200/300

Brand: 3idee Pages: 7

Brand: 3idee Pages: 7

Brand: 3idee Pages: 7

hp27-o VESA Adapter

Brand: 3idee Pages: 9

BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor...

Brand: Panasonic Pages: 64

Brand: Zenisu Keisoku,Inc. Pages: 21

Brand: Ralink Pages: 27

Vive TC NE30W-EU

Brand: HTC Pages: 36

Brand: Aiphone Pages: 15

Brand: Syba Pages: 2

Brand: Jabra Pages: 2

Brand: Tailwind Pages: 3

802.11g PCI Card Wireless Adapter

Brand: 2Wire Pages: 17

Brand: Kvaser Pages: 21

Brand: MSG Equipment Pages: 12

Brand: Askey Pages: 60

Brand: Sony Pages: 28

BDV-HZ970W (UWA-BR100)

Brand: Sony Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands