Quartz Q16/Q32 System Manual
18 May 2004
Issue 5.00
Page 36
Remote panels are used to indicate current routes and to make new route selections at various
locations to suit the user. Most panels are connected to the frame via the 'Q-link' coaxial link. The
identity of each panel is determined by the unique setting of a rotary hex switch in each panel.
Each panel is set up to operate in a particular way by the
system setup
located in the master frame of
the system and edited using the WinSetup program. This determines, for instance, which
destinations can be controlled from each panel. The rotary hex switch mentioned above serves to
route the correct setup to each panel.
Custom panels using button-per-source selection can be connected back to the matrix frames via the
Parallel Interface PI-1604A or PI-1608A (see Sec 6: Options) and then the Q-link.
