Quartz Q16/Q32 System Manual
18 May 2004
Issue 5.00
Page 3
SAFETY
WARNING: Dangerously high voltages are present inside this equipment.
WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or
moisture.
WARNING: This equipment uses power/mains connectors fitted with earth pins. It is most
important as a matter of personal safety that the equipment is properly earthed.
CAUTION: This equipment may have more than one power supply cord. To reduce the risk of electric
shock, disconnect all power supply cords before servicing.
CAUTION: These servicing instructions are for use by qualified personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so. Refer all servicing to qualified personnel.
CAUTION: To reduce the risk of electric shock, plug each power supply cord into separate branch
circuits employing separate service grounds.
NEVER use flammable or combustible chemicals for cleaning components.
NEVER operate this product with any covers removed.
NEVER wet the inside of this product with any liquid.
NEVER bypass any fuse or replace any fuse with a value or type other than those specified.
NEVER operate this product in an explosive atmosphere.
NEVER block the airflow through ventilation slots.
NEVER expose this product to extremely low or high temperatures.
This product complies with the requirements of the product family standards for video, audio, audio-
visual entertainment, and lighting control apparatus for professional use as mentioned below.
EN60950 Safety
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity
EN504192 2005
Waste electrical products
should not be disposed of with
household waste. Contact
your Local Authority for
recycling advice
Quartz Electronics Ltd
Tested to comply
with FCC
Standards
For Home or Office Use
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may cause harmful interference,
and
2) This device must accept any interference
received, including interference that may
cause undesired operation.
