![background image](http://html1.mh-extra.com/html/quantum/valueloader-lto-1/valueloader-lto-1_user-manual_4082591063.webp)
Appendix A Specifications
SCSI Interface
LTO Ultrium 8-Slot Autoloader User’s Guide
47
SCSI ID Settings
1
The autoloader contains two SCSI ID settings — one for the autoloader’s
SCSI controller and one for the tape drive. If there is another device
already assigned to these IDs, you will need to change the IDs. For
information on how to do this, see
Changing the SCSI ID Settings
.
Table 13 SCSI ID
Default Settlings
Changing the SCSI
ID Settings
1
To change the SCSI ID settings:
1
From the main menu, press the
Previous
or
Next
button until
Configuration
displays in the liquid crystal display.
2
Press
Enter
to select the
Configuration
menu.
3
Press the
Previous
or
Next
button until
Change SCSI ID
displays in the
LCD
4
Press
Enter
to select the
Change SCSI ID
option.
5
Press the
Previous
or
Next
button until
Loader
displays in the LCD. To
change the SCSI ID of the tape drive, press the
Previous
or
Next
button until
Drive
displays in the liquid crystal display.
6
Press
Enter
to select the
Loader
option.
7
Press the
Previous
or Next button until the desired SCSI ID displays.
8
Press the
Enter
button.
Cycle Power for New SCSI ID
displays on the
LCD screen.
9
Turn off the autoloader. Wait a few seconds, and then turn the
autoloader on again. The selected SCSI ID is now set.
Autoloader
5
Tape drive
6
Note:
If you change the SCSI ID, you may also need to cycle power
on the host server and reconfigure your backup software
before you can use the autoloader. The autoloader and the
tape drive must each have unique SCSI IDs. It is your
responsibility to make sure you do not assign duplicate IDs
within a bus.