![background image](http://html1.mh-extra.com/html/quantum/valueloader-lto-1/valueloader-lto-1_user-manual_4082591021.webp)
Chapter 1 Quick Start
Starting the Autoloader
LTO Ultrium 8-Slot Autoloader User’s Guide
5
Starting the Autoloader
1
To start the autoloader:
1
Attach the power cord to the autoloader, and then to the AC outlet.
For more information on power cords, see
Power Specifications
on
page 50.
Figure 4 Attaching the
Power Cord and a
SCSI Terminator
2
Connect the SCSI cables and the terminator. For more information
about the SCSI interface, see
Performance Specifications
on page 49.
• Connect one end of the SCSI cable to one of the SCSI connectors
on the back of the autoloader.
• Connect the other end of the SCSI cable to the SCSI connector on
the SCSI host bus adapter or on the previous device of the SCSI
bus.
• If this is the last device in the SCSI chain, connect the SCSI
terminator to the remaining SCSI connector on the back of the
autoloader.
Table 1 SCSI ID
Default Settings
Autoloader
5
Tape drive
6
AC outlet
SCSI connectors