Chapter 2 Installing Your Tape Drive
Managing the Tape Drive
SDLT 600A Product Manual
20
passed to the DHCP Server for dynamic DNS updates. For more
information, contact your network administrator.
IP address
2
For a manual IP address configuration (DHCP disabled), enter a valid IP
address here according to the network configuration. For more
information, contact your network administrator.
Netmask
2
Enter the subnet mask for your particular network here. It is advisable to
enter a fallback subnet mask when using DHCP in case the DHCP server
is unavailable. For more information, contact your network
administrator.
Broadcast address
2
Enter the broadcast address for your particular network here. It is
advisable to enter a fallback broadcast address here when using DHCP
just in case the DHCP server is unavailable. For more information,
contact your network administrator.
Default gateway
2
You can enter the IP address of the default gateway for your particular
network. Enter a default gateway only if you wish to connect from a
network. For more information, contact your network administrator or
see other third-party technical references for more details.
2
Note:
When installing multiple drives, be sure each tape drive has a
unique IP address and host name.
Note:
The IP address
must
be unique; it cannot be in use by another
device on the network. Select an IP address that is appropriate
for your network environment.
