Chapter 2: Hardware Overview
StorNext M330 Connectivity
StorNext M330 Metadata Appliance Hardware Guide
27
default configuration are located in the “Step 3: System” section of the
latest version of the
StorNext User’s Guide
.
The default M330 network interface configuration is as follows:
• Ethernet Port 1 (Eth1) is configured as the GUI/management
network port.
• Two interfaces, Ethernet Port 2 (Eth2) and Ethernet Port 3 (Eth3), are
bonded together by default into Bond 0 for the Metadata network.
Bond 0 can be broken in the GUI. In this case, Eth2 will be
configured as a standalone port, and Eth3 will be disabled.
shows the customer-facing Ethernet ports on the StorNext
M330.
Figure 13 StorNext M330
Network Ports
identifies the logical port configuration, port function and
default bonding for the StorNext M330.