Quantum Scalar LTFS Appliance: Hard Drive Blanks Replacement
6-68094-01 Rev A
December 2013
4
Replacing a Hard Drive Blank
Replacing a Hard Drive Blank
To replace the hard drive blank, complete the following steps:
Note:
To avoid damaging the hard drive blank’s metal spring, follow the hard
drive blank installation sequence described in
Figure
4
if installing more
than one hard drive blank at a time.
Figure 4 Scalar LTFS Appliance
Hard Drive Blanks Installation
Sequence
1
Insert the replacement hard drive blank into the empty drive bay.
2
Continue inserting the hard drive blank until the release button clicks into
place.
3
If you removed the front bezel, place it back on the chassis:
a
Hook the right end of the bezel onto the chassis of the top Scalar LTFS
Appliance.
b
Fit the free end of the bezel onto the chassis.
c
Secure the bezel with the key lock.
Hard drive
blank
Hard drive 0
Hard drive 1
Hard drive
blank