![background image](http://html2.mh-extra.com/html/quantum/scalar-50/scalar-50_user-manual_3564598115.webp)
Chapter 3 Quantum Scalar 50 Remote Management
Setup
Quantum Scalar 50 User’s Guide
91
SCSI/Fibre
3
This section allows the user to set the SCSI IDs for the changer (library)
and every tape drive within the library and also configure any Fibre
Channel tape drives.
1
To access the
SCSI/Fibre
page, from the
Setup
page, click on the
SCSI/
Fibre
tab at the top of the page.
The
SCSI/Fibre
page displays (see
Figure 63 SCSI Page
2
To change a SCSI ID, enter the ID number in the field next to the
device and click
Apply
.
Note:
You can also determine the tape drive firmware revision from
the
SCSI/Fibre
page.
Note:
SAS tape drives do not require a SCSI ID and cannot be
configured. Use the default tape drive configuration
information.
Summary of Contents for Scalar 50
