Appendix C Installing the Scalar 50 Library
Installing the Library
Quantum Scalar 50 User’s Guide
207
Loading the Tape
Cartridges
3
Before operating the library, load the appropriate tape cartridges (LTO
and/or SDLT) into the library starting with the left-hand magazines
(refer to
Preparing the Library for Operation
on page 30 for more
information on tape cartridges).
Initial Configuration
3
Initially configuring the library consists of the following steps:
•
•
•
Turning on the Library
3
To turn on the library:
1
Verify that:
• Power cables are firmly in place
• All doors are closed
2
Turn on the power switch located in the lower left-hand corner of the
OCP (see
Summary of Contents for Scalar 50
