manualshive.com logo in svg

Quantum Scalar 50, User Manual

Share
Download
Quantum Scalar 50 User Manual Download Page 115

Chapter 3  Quantum Scalar 50 Remote Management

Setup

Quantum Scalar 50 User’s Guide

91

SCSI/Fibre

3

This section allows the user to set the SCSI IDs for the changer (library) 
and every tape drive within the library and also configure any Fibre 
Channel tape drives.

1

To access the 

SCSI/Fibre

 page, from the 

Setup 

page, click on the 

SCSI/

Fibre

 tab at the top of the page.

The 

SCSI/Fibre

 page displays (see 

figure 63

).

Figure 63  SCSI Page

2

To change a SCSI ID, enter the ID number in the field next to the 
device and click 

Apply

.

Note:

You can also determine the tape drive firmware revision from 

the 

SCSI/Fibre

 page.

Note:

SAS tape drives do not require a SCSI ID and cannot be 
configured. Use the default tape drive configuration 
information.

Summary of Contents for Scalar 50



































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands