![background image](http://html2.mh-extra.com/html/quantum/rdx-8000/rdx-8000_user-manual_3949456019.webp)
19
RDX 8000 User Guide
5.3.1 OCP Display Content
Once the RDX 8000 unit completes the power up boot sequence the OCP will become active. The OCP will display the
system information screen which identifies the unit’s iSCSI QN name, current IP address / status of Ethernet port 1, as
well as the unit current firmware revision level.
The normal display mode rotates through nine screens. The System Information screen is followed by eight individual
screens indicating slot status. Following slot 8 the rotation is repeated, beginning with the System Information screen.
After initial power up the OCP will hold on the System Information screen. The OCP may be set to automatically rotate
through all screens by pushing and holding the OCP Navigation button for a three seconds (long push).
The general layout of the Slot Status screen is shown in the figure below:
Figure 7 —
CARTRIDGE S/N: XXXXXXX
Cartridge Serial Number
Cartridge Eject Prevented
OCP Navigation
Slot Number
Cartridge Format
Cartridge Write
Cartridge Health
OCP Slot Status