manualshive.com logo in svg

Quantum RDX 8000, User Manual

Share
Download
Quantum RDX 8000 User Manual Download Page 42

42

RDX 8000 User Guide

5.11  User operations – The CONFIGURE tab

The CONFIGURE tab allows the user to set various operating parameters of the RDX 8000. The CONFIGURE tab is avail-
able to users with access level of Administrator or Service.

5.11.1 Device - Set Operating Mode
The Device page allows the user to configure the operating mode of the RDX 8000, as well as the System Name and the 
Global Cartridge Lock status.

System Mode
The System Mode field allows the user to select the operating mode of the device. The choices are ‘Tape Library”, “Disk 
Library” and “JBOD”. If you choose Tape Library or Disk library mode there is an additional field which appears allowing 
the configuration of the drive count. 1 to 3 drives may be selected.

The RDX 8000 system comes pre-configured from the factory as default in the “JBOD” operation mode. If you have 
completed installation of the iSCSI initiator and connected to the unit via the Targets tab, you are ready to address the 
eight drives. To operate the RDX 8000 in the Tape Library mode or Disk Library mode change the operation mode via the 
RDX 8000 interface.

The Operating Mode selected will apply to all eight slots of the RDX 8000 unit.

Figure 22 — RDX 8000 Configure Device - JBOD Mode

Summary of Contents for RDX 8000

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands