13
COMFORT ADJUSTMENTS
Figure 9. Controller and Keyboard
Power Positioning Systems Adjustment
Your power chair may be equipped with a power recline,
power tilt or power elevating leg rest system. You can change
the position of these options through the controller.
Do not allow the motor to run more than a few seconds
after the mechanism reaches the top or bottom limit.
NOTE: For more information on operating the power
positioning systems, refer to the information supplied in
supplemental manuals or contact your Quantum Rehab
Provider.
The power positioning systems are intended for use
on a level surface only. Never operate your power chair
while tilted or reclined on an inclined surface. Failure to
heed this warning can result in the power chair tipping
over.
Never operate your power chair while tilted or reclined
on bumpy or uneven surfaces. Failure to heed this
warning can result in the power chair tipping over.
Never operate the power positioning systems while your
power chair is in the freewheel mode.
Always fasten the positioning belt when operating the
power positioning systems.
Pinch Point Hazard! Keep area around actuator clear
when operating the power positioning systems or
returning to your starting position.
WARNING!
WARNING!
Battery Condition Meter
On/Off Key
Headlight Key
Maximum Speed/
Profile Indicator
Speed/Profile
Increase Key
Right Indicator Key
Horn Key
Hazard Light Key
Speed/Profile
Decrease Key
Left Indicator Key
Actuator Select Key
