Chapter 3 Quantum PX720 Remote Management
Utilities
Quantum PX720 User’s Guide
177
System Tests
3
The system test section allows the user to run a series of tests on the
library robotics and tape drives.
1
To access the
System Tests
page, from the
Utilities
page, click on the
System Tests
tab at the top of the page.
The
System Tests
page displays (see
Figure 104 System Tests Page
To run a system test on a cabinet:
1
Select an action and a number of runs and click
Apply
.
a
Select
Continuous
to continuously run the selected system test.
b
Select
Perform Inventory
to perform an inventory of the library
prior to running the system test.
Note:
If a system test is in process (initiated by another remote
browser), the input fields for system tests are replaced with
“System Test in Process.” The
Home
status page also displays
this message.
Note:
The library must be off-line before executing any system tests.