manualshive.com logo in svg

Quantum PX720, User Manual, Page: 153 / 259

Share
Download
Quantum PX720 User Manual Download Page 153

Chapter 3  Quantum PX720 Remote Management

Setup

Quantum PX720 User’s Guide

130

Figure 76  Devices Page

2

To change a SCSI ID, enter the ID number in the field next to the 

device and click 

Apply

.

To change a drive SCSI ID, the cabinet must be off-line. To change a 

cabinet (changer) SCSI ID, the library must be rebooted before the 

new ID takes effect.

3

Click the drive link to view the drive details.

4

Click 

Save As...

 to save the SCSI setup information to a local 

destination. Use the 

Send...

 button to email the SCSI setup 

information to one or more recipients.

Native Fibre Channel Tape Drives

3

Native Fibre Channel tape drives such as the HP LTO-2/-3 and Quantum 

SDLT600/DLT-S4 can be directly connected to a Fibre Channel host or 

network without a SCSI to Fibre Channel bridge. When native Fibre 

Note:

The drives are listed by logical index starting at 0 for each 

partition.

Summary of Contents for PX720




































































































































































































































































Reviews:

No comments