![background image](http://html2.mh-extra.com/html/quantum/px500-series/px500-series_upgrade-instructions_3521446019.webp)
Quantum PX500 Series FC1202 Upgrade Instructions
81-81351-01 C01
April 2006
FC1202 Upgrade Procedure
19
Figure 14 PX506 Series
Interconnection (6 drives)
Configuring the
FC1202 Bridge
Software
0
After the FC1202 is installed, you must configure the bridge and map the tape
drives and library robotics controller to the Fibre Channel port. Configuring
the FC1202 consists of the following steps:
•
Accessing the FC1202 Bridge
•
Configuring the FC1202 Bridge
•
Saving the Configuration File
•
Enabling Serverless Backup (Xcopy)
Accessing the FC1202 Bridge
0
To configure the FC1202 bridge:
1
Open a web browser on the service PC.
Ethernet switch
FC bridge 1
FC bridge 2
FC bridge 3
SCSI jumper to
SCB
Terminator
SCSI jumper to
from FC1202
to tape drives
PX506 shown
Ethernet
cables from
FC1202 and
SCB to switch
SCB (system
controller
board)