Quantum PX500 Series FC1202 Upgrade Instructions
81-81351-01 C01
April 2006
FC1202 Upgrade Procedure
9
Installing the FC1202
Bridge
0
The number of FC1202 bridges required depends on the number of tape
drives installed in the library.
• 1 to 2 tape drives requires 1 FC1202
• 3 to 4 tape drives requires 2 FC1202 bridges (PX506 and PX510 only)
• 5 to 6 tape drives requires 3 FC1202 bridges (PX506 and PX510 only)
• 7 to 8 tape drives requires 4 FC1202 bridges (PX510 only)
• 9 to 10 tape drives requires 5 FC1202 bridges (PX510 only)
To install the FC1202 bridge:
1
Loosen the two PHILLIPS screws securing the blank off plate(s) to the
CPCI card cage and expose the number of slots needed for the FC1202
installation (one blank off plate per FC1202).
2
With the SCSI ports located to your right as you face the back of the
library, slide the first FC1202 into the slot of the card cage (see
figure 6
for
PX502,
figure 7
for PX506, and
figure 8
for PX510).
Figure 6 Installing a
FC1202 Bridge (PX502)
Note:
Start the FC1202 installation in slot 1 of the CPCI card cage
(PX506 and PX510 only).
Blank off plate
Screws
Card cage
FC1202
